Strobe pilot. Red flash FAW350
The FAW350 is a general purpose wall mount LED beacon for fire alarm applications. It has a special base that contains all wiring connections andallows easy removal/placement of the device. With an EN54-23-approved coverage pattern of W-2.4-7.5, each FAW350 can be mounted up to 2.4 m highand cover a 7.5 x 7.5 m square room with a single device.
What is the strobe pilot installation like. Red flash FAW350?
FAx350 beacons enable faster installation and maintenance thanksto an innovative mounting base. Without the need for locking screws,these beacons use TimeSaver bases ™ the 630 series detectors. The heads are simply locked at the base with a “rotate and click” action,allowing them to be placed or removed at any time because the base is the only component that needs to be wired. As the need for wiring is reduced, of coursetime and commissioning costs arealso reduced.
How efficient and versatile is the strobe pilot. Red flash FAW350?
FAx350 beacons use a specially designed lens that provides uniform light output over the specified coverage area. The flare frequency of the beacon can be adjusted during installation,with a selection of 0.5Hz or 1Hz.
The mechanism to lock the device to the base can be activated if necessary. Once activated, a special tool is required to remove the beacon from the base.
General characteristics of the strobe pilot. Red flash FAW350
- Automatic synchronization
- Anti-manipulation locking mechanism
- Shallow mounting base
- Wiring directly to the base
- Selectable flash frequency
|Operating voltage||17 to 60 VDC|
|Flash rate||0.5 Hz or 1 Hz|
|Physical dimensions||100 x 81 mm (x D)|
|Net weight||215 grams|
|Operating temperature||-25 up to + 70oC|
|Relative humidity||5 to 95% non-condensing|
|Current consumption||20 mA at 0.5 Hz / 40 mA at 1 Hz|
|Automatic synchronization||Phased start|
|Line monitoring input||Polarized input|
|Mounting height||Up to 2.4m|
|Soil coverage||Up to 7.5 x 7.5 m|