COMPARTELO CON TU AMIGOS
Strobe pilot. Red Flash FAC355
€69,06 + IVA
Strobe pilot. Red flash FAC355 / Kilsen. The base is the only component that needs to be wired.
Agotado
*Los productos no incluyen gastos de transporte y los precios son exclusivos online.
Descripción
Strobe pilot. FAC355 Red Flash
The FAC355 is a general purpose ceiling mount LED beacon for fire alarm applications. It has a special deep base containing all wiring connections and allows easy removal/placement of the device. With an EN54-23-approved coverage pattern of C-3-8.9, each FAC355 can be mounted up to 3 m in height and provide a cylinder diameter coverage of 8.9 m. Therefore, a room of 6.3 x 6.3 m square can be covered with a single device.
Easy installation and maintenance of the strobe pilot. FAC355 Red Flash
FAx355 beacons enable faster installation and maintenance, thanks to an innovative mounting base. Without the need for locking screws, these beacons use TimeSaver bases ™ the 630 series detectors. Heads simply lock at the base with a “rotate and click” action, allowing them to be placed or removed at any time because the base is the only component that needs to be wired. As the need for wiring is reduced, of coursetime and commissioning costs arealso reduced.
Strobe pilot operation. FAC355 Red Flash
FAx355 beacons use a specially designed lens that provides uniform light output over the specified coverage area. The flare frequency of the beacon can be adjusted during installation, with a selection of 0.5Hz or 1Hz.
The mechanism to lock the device to the base can be activated if necessary. Once activated, a special tool is required to remove the beacon from the base. Once
Features of the strobe pilot. FAC355 Red Flash
- Automatic synchronization
- Anti-manipulation locking mechanism
- Deep mounting base
- Wiring directly to the base
- Selectable flash frequency
- Degree of input protection IP65
| Operating voltage | 17 to 60 VDC |
| Operating temperature | 25 up to + 70oC |
| Relative humidity | 5 to 95% non-condensing |
| Environment | Interior, Exterior |
| IP rating | IP65 |
| Automatic synchronization | Phased start |
| Income protection | IP65 |
| Deep base | 100 x 104 mm |
| Light coverage | C-3-8.9 |
| Mounting position | Ceiling |
| Mounting height | Up to 3m |
| Soil coverage | Up to 8.9 m in diameter |
| Certification | EN54-23 |
| Current consumption | 20 mA at 0.5 Hz / 40 mA at 1 Hz |
| Line monitoring input | Polarized input |
| Operating temperature | -25 up to + 70oC |
| Weight | 250g |
| Physical dimensions | 100 x 104 mm (x D) |
| Operation | Continuous |
| Flash rate | 0.5 Hz or 1 Hz |
| Accommodation | High-impact polycarbonate |
| Housing color | Red |
| Flash color | Red |
Información adicional
| Fabricante | KILSEN |
|---|---|
| Sistema | Conventional |
| Tipo de sirena | Optics |
| Para instalar en | Inside, Outside |
