COMPARTELO CON TU AMIGOS
Power Supply 24V 5A + 1.6A PM705C
€473,81 + IVA
Power supply 24V 5A + 1.6A PM705C / Kilsen. Complete electronic short-circuit protection.
Agotado
*Los productos no incluyen gastos de transporte y los precios son exclusivos online.
Descripción
24V 5A + 1.6A PM705C power supply
The PM705C is a full-featured EN54-4-approved power supply, ideal for use in fire system applications. It features intelligent battery charging, monitoring and signaling. The 27.6 VDC regulated output will generate up to 5 A in the charge and provide up to 1.6 A to charge the backup batteries. The charging output features full electronic short-circuit protection in both network battery operation and standby mode. Maximum battery life is ensured through continuous active battery monitoring and 3 different charge levels: volume (fast charging), absorption and temperature-compensated flotation. Deep discharge protection prevents premature battery failure when operating from standby mode for extended periods of time. Inside the unit, a diagnostic LED with various flashing patterns ensures accurate diagnosis when the unit fails.
How to install 24V 5A + 1.6A PM705C power supply
A PM705C power supply is supplied in a self-contained wall mount box that can also accommodate 17 Ah batteries (not included). The battery charging circuit isenergized only when a battery is properly connected and the battery voltage is greater than 14 V. A green LED and a red LED that is visible when the box is closed indicates network presence and failures. A red diagnostic LED inside the unit distinguishes between several faults by various flicker patterns. A potential-free contact is used to report faults due to output failures, battery failures, charger failures, or internal failures. A second potential-free contact signals network loss. The unit starts automatically with battery life, i.e. it connects the battery and the unit works. The power grid does not need to be present and is very useful for commissioning in newly built installations.
Features 24V 5A + 1.6A PM705C power supply
- Approved according to EN54-4 and VdS certificate
- Self-contained box that houses 17 Ah batteries
- The optional battery box houses 38 Ah batteries
- Electronic overload protection
- Deep discharge protection
- Network LED indicators and failure
- Fault diagnostic LEDs, inside the unit
- 2 x Relay outputs: network failure and failure
- Temperature-compensated load
- Wide input voltage range
- Battery-powered start
| Power supply value | 100 – 230 VAC, 50 Hz – 60 Hz |
| Operating voltage | 93 to 264 VAC, 45 Hz – 65 Hz |
| Current consumption | 2.5 A maximum for full load of 5 A and 1.6 A charge |
| Operating temperature | -10 up to + 40oC |
| Storage temperature | -20 up to + 80oC |
| Relative humidity | 95% non-condensing |
| On the front of the unit | Green LED – power
Red LED – breakdown |
| Inside the unit | Red LED – fault diagnosis |
| Loading | Constant current load 1.6 A at 80% in 24 h; Floating load 100% in 48 h |
| Deep discharge protection | Disconnecting the battery to 21 V |
| Low battery threshold | Nominal 23 V |
| Voltage | 26-28 VDC with network
18-26 VDC standby |
| Charging current | 0 – 5 A |
| Wave | 100 mV max. |
| Overload | Electronic shutdown at 8 A |
| Fault relay | N/C contacts from 100 mA to 60 VDC |
| Network failure relay | N/C contacts from 100 mA to 60 VDC |
| Physical dimensions | 400 x 420 x 80 mm |
| Net weight | 6.2 kg (without batteries) |
| Color | White |
| Battery capacity (in the housing) | 2 x 17Ah series connected |
| Battery capacity (with PM700BAT) | 2 x 38Ah series connected |
Información adicional
| Fabricante | KILSEN |
|---|
TAMBIÉN TE PUEDE INTERESAR
También te recomendamos…
-
¡Oferta!
Power Supply 24V 0.5A – PM861
€103,03 + IVA Leer más -
¡Oferta!
Power Supply 24v 2A + 0.8 APM702C
€434,33 + IVA Leer más -
¡Oferta!
Power Supply 24V 4A – PM865
€231,40 + IVA Leer más -
¡Oferta!
Power Supply 24V 2A – PM863
€172,43 + IVA Leer más -
¡Oferta!
Power Supply 24V 1.5A – PM862
€137,35 + IVA Leer más
