Descripción
With a 27.6 V DC regulated output that supplies continuous full rated current at the most additional current charge to charge two 12 V backup batteries.
The highly efficient switching mode design ensures low operating costs, generates less heat, and with a small physical size increases the space available for additional PCBs or cables. Modular construction simplifies maintenance.
Power supply features 24V 0.5A – PM861
- Network failure and presence indicators
- Disconnecting the battery to prevent a deep discharge
- Ignition crank
- Fault outputs
- Network fuse and cc
- Powder-coated steel casing
- Fault outputs
- Network fuse and cc
- Powder-coated steel casing
Fuse(s) | Input 230 VAC 2 A, output 12/24 V 1 A |
Main entrance | 230 VAC 50 Hz ± 10% |
Power output voltage | 27, 6 VDC |
Output ripple | 100 mV pk-pk max. |
Main output current | 1 A |
Max battery capacity | 7.2 Ah (x2) |
Battery charging current | 0.5 A |
Battery recharge time | 20 hours |
Battery disconnect voltage | 19.6 ±0.2 VDC |
Physical dimensions | 330 x 275 x 80 mm (width x height x depth) |
Color | White |
Form factor | Steel cabinet |
Operating temperature | -10 up to + 40oC |
Relative humidity | 95 % |
Compliance | CE, ALCANCE, RoHS 2, WEEE |
Charging output | 0.5 A |
Powder-coated housing (steel) | 1.2 millimetres |