Class B Alarm Pushbutton Signal
The Class B alarm pushbutton signal is available in PVC material 0.8 mm and Aluminium 0.8 mm. It also has several sizes to choose from for this same product.
The sign is used to indicate the location of an emergency button, and each must have a signal that identifies you individually.
Signaling is mandatory.
How to install an alarm pushbutton signal?
The alarm pushbutton signaling will be made on the wall where the equipment is installed or on any other element where we can paste the signal. The installation will be on the same vertical of the fire button at a height visible to users.
To paste it dlet’s apply silicone to the back of the signal, 1 point of silicone for each corner and another in the middle. With 5 silicone points we will have enough to install the sign on the wall.
Emergency signs regulations.
The photoluminescent signaling has to comply with the UNE 23035 standard
The signs have to be permanently identified, with the following data:
- Manufacturer name
- Month, year and manufacturing batch.
- Luminance in mcd / m2 according to UNE 23035-1
- Attenuation time
- Colors during stimulation
- Signal category (Class A or B) according to photoluminescence.
– According to the UNE 23034 standard: The Signs to use for evacuations and the sizes to use according to distances.
– According to UNE 23033 / ISO 7010: We will be able to check in the technical building code the different measurements / sizes of the signs regarding the observation distance.