COMPARTELO CON TU AMIGOS

Compartir en facebook
Compartir en whatsapp
Compartir en twitter
Compartir en email
Compartir en pinterest

VDS Retainer With FE560 Wall Mount Bracket

79,76 + IVA

VDS retainer with FE560 wall mount bracket. Wall, floor or ceiling mounting, low power: 1.5 W. Kilsen products.

SKU DEL PRODUCTO: FE560 Categorías , Etiqueta

*Los productos no incluyen gastos de transporte y los precios son exclusivos online.

Descripción

VDS retainer with FE560 wall mount bracket

The FE560 is a VdS-approved door holder with a universal adjustable tube with a range of between 156.5 and 175 mm when used in a 180oC configuration and between 125 and 150 mm in 90″ configuration. It is usually well suited for applications where the magnet height may need an adjustment to suit conditions. It can be used in floor, ceiling or wall mounting applications, and is supplied with a manual release button.

The FE500 series door clamping magnets are the result of years of specialized development. With a rated power of only 1.5 W at 24 V DC, these powerful magnets have a retaining power of 490N. The FE560 has a spring-loaded pin to ensure expulsion against remaining magnetism.

The FE500 Series offers cost-effective solutions without sacrificing performance. Reinforced aluminum gives it an elegant look and robust strength, while reinforced aluminum wall mount extensions allow a distance of up to 175 mm from the wall. Retention plates are not supplied with the magnet and can be ordered separately depending on the application.

 

How is the installation of the VDS retainer with FE560 wall mount bracket?

For convenient ease of installation,all units are complete with electrical terminations. Protective diodes prevent electromagnetic pulses and reverse polarity protection, and speed up installation. The brackets are pre-drilled in a convenient standard format for quick mounting.

 

Certificates

All models are approved by you.

Features of the VDS retainer with FE560 wall mount bracket

  • Wall, floor or ceiling mounting
  • Low power: 1.5 W
  • 490 N of retention power in VDS coils
  • 100% duty cycle
  • Anti-remnant ejector
  • Reverse polarity protection and protection diode
  • Release button
  • Approved by VdS (see specifications)

 

Retention force N (Newtons) 490
Release button Yes
Polarity reversal protection Yes (diode)
Type of power supply 24 VDC
Current consumption 1.5 W
Physical dimensions 125 to 150 x 92.5 mm (mounting at 90 x H x W)
156.5 to 175 x 70 mm (mounting at 180 x L x )
IP rating IP42
VDS coil Yes

Información adicional

Fabricante

KILSEN

Equipos

Retainers

TAMBIÉN TE PUEDE INTERESAR

Abrir chat
1
¿Qué necesitas?
¡Este VDS Retainer With FE560 Wall Mount Bracket puede ser tuyo desde*€79,76*+IVA!
Si tienes alguna duda, escríbenos por Whatsapp