Descripción
Floor/wall mount retainer (adjustable support 475mm) FE260-475
The FE260-475 is a floor/wall mount door stand with a universal adjustable tube with a 475 mm range when used in 180″ and 450 mm configuration in 90″ configuration. It offers a clamping force of 400N and a release button.
How is the floor/wall mount retainer built (475mm adjustable bracket) FE260-475?
The magnet is constructed with a pressed coil and an anti-remnant pin,which gives it IP54 protection. Protective diodes are integrated into this construction.
How to adjust the floor/wall mount retainer (adjustable bracket 475mm) FE260-475?
The FE260-475’s “head” allows for two mounting options. The first is the 180″, which is typically used when the door stand is mounted on the wall. In this configuration, the magnet is located “above” the tube. And the second configuration is the 90″, which is normally used when the door holder is mounted on the floor. In this configuration, the magnet is located on the “side” of the tube, as shown in the image. To allow even more flexibility, the tube can also be cut shorter to match the exact distance required.
How to install floor/wall mount retainer(475mm adjustable bracket) FE260-475?
– For convenient ease of installation, the door holder comes complete with electric screw terminals.
– The base is pre-drilled in a practical standard formatfor quick mounting.
– The door holder is supplied complete with a retaining plate, which offers an angular adjustment.
Certificate of Approval
The FE260-475 is fully approved according to EN1155.
Floor/Wall Mount Retainer Features (Adjustable Bracket 475mm) FE260-475
- Low power: 1.6 W
- 400 N retention force
- Anti-remnant ejector
- Spark suppression diode and reverse polarity protection
- Release button
- Approved EN1155
- Adjustable
- Guard plate included
Retention force N (Newtons) | 400 |
Release button | Yes |
Spark Suppression Diode | Yes |
Polarity reversal protection | Yes |
IP rating | IP54 (magnet) |
Type of power supply | 24 VDC |
Current consumption | 1.6 W. |
Duty cycle | 100% |
Regulations | EN1155 |
Physical dimensions | 80 x 90 x 450 mm (W x H x D) Setting 90′ Setting up 80 x 90 x 475 mm (W x H x D) 180″ configuration |