COMPARTELO CON TU AMIGOS
Floor Mount Retainer With Pushbutton Unlock FE290
€58,82 + IVA
Floor mount retainer with FE290 / Kilsen release pushbutton. 400N clamping force and a release button.
Agotado
*Los productos no incluyen gastos de transporte y los precios son exclusivos online.
Descripción
Floor mount retainer with FE290 release pushbutton
The FE290 is a surface mount door holder with mains power,in a Bayblend housing, which offers a 400N clamping force and a release button. Cable input is possible from the back or from the sides, and the release button can be located at the top or on one side.
How the floor mount retainer is built with FE290 release pushbutton
The magnet is constructed with a pressed coil and an anti-remnant pin,which gives it IP54 protection. Protective diodes are integrated into this construction.
Floor mount retainer housing with FE290 release pushbutton
The plastic housing is made of Bayblend and contains 30% PA6 fiberglass,which makes it much stronger than standard ABS. Bayblend offers high heat resistance, high impact and impact resistance withnotches, and high rigidity and dimensional stability.
How to install the floor mount retainer with FE290 release pushbutton
– For convenient ease of installation,the door holder comes complete with electric screw terminals. – The housing is pre-drilled in a practical standard format for quick assembly. – The door holder is supplied complete with a retaining plate, which offers an angular adjustment. – The release button canbe placed in three different locations: up, left or right – Cable input can be done in four different locations: back, top, left or right.
Features of the floor mount retainer with FE290 release pushbutton
- Low power: 1.6 W
- 400 N retention force
- Anti-remnant ejector
- Spark suppression diode and reverse polarity protection
- Release button
- Guard plate included
| Retention force N (Newtons) | 400 |
| Release button | Yes |
| Spark Suppression Diode | Yes |
| Polarity reversal protection | Yes |
| Type of power supply | 24 VDC |
| Current consumption | 1.6 W. |
| Duty cycle | 100% |
| Physical dimensions | 85 x 110 x 38 mm (width x height x depth) |
| IP rating | IP54 (magnet) IP42 (connection) |
Información adicional
| Fabricante | KILSEN |
|---|---|
| Equipos | Retainers |
