Compartir en facebook
Compartir en whatsapp
Compartir en twitter
Compartir en email
Compartir en pinterest

Ip65 Dual Infrared Sensor Flame Detector - IP66

2051,743058,97 + IVA

Flame detector with dual infrared sensor IP65 / FF742 – IP66 / FF747. Detection distance up to 45 meters. Kilsen products.

SKU DEL PRODUCTO: FF740 Categorías , Etiqueta

*Los productos no incluyen gastos de transporte y los precios son exclusivos online.


FF742 FF747

Flame detector with dual infrared sensor IP65 – FF742 / IP66 – FF747

The FF742 is a dual infrared flame detector,mounted on a zinc alloy housing, and the FF747 is an intrinsically safe IR2 flame detector in a die-cast zinc alloy housing. This detector has an excellent response that gives high immunity to foreign sources that may interfere with you. The new technology of its microprocessor allows you to work with different levels of flame intensity and allows you to operate normally in adverse conditions, such as through smoke, vapors, dust, etc.. The sensitivity of the detector can be adjusted in accordance with EN54-10.


How is the installation and maintenance of the flame detector with dual infrared sensor IP65 – FF742 / IP66 – FF747?

The detector can be wired with two wires asa conventional system, through 4-20mA current loop or through voltage-free contacts. It can work with or without alarm interlocking. You can remotely activate the auto-test utility. An adjustable stainless steel bracket can optionally be supplied. The detector tolerates vibrations, and the wind does not affect its performance at all. The infrared sensor has an excellent response that even allow you to work through crystals or windows. Special test equipment is available for fine and precise adjustment of this type of detector. This test equipment also allows for operational testing.


How much does the flame detector with IP65 dual-infrared sensor – FF742/IP66 – FF747 reduce false alarms?

Most infrared detectors respond to light with a wavelength of about 4.3om,corresponding to the flames of most hydrocarbons. Thanks to its extended response, between 1.0 and 2.7om, this detector can respond to most flames even flashing. It can even detect flames not visible to the human eye, such as hydrogen flames. The FF742 r detectoralso spins at wavelengths adjacent to those described, so they can discriminate between real flames and spurious sources of sparks or flashes. The combination of the filters that the detector has and the processing of the signal that is performed, make this detector can be used without any risk of false alarms in difficult situations, such as due to flashes of sunlight.


Operating voltage 14 to 30 VDC
Net weight 2 kilograms
Operating temperature -10 up to + 55oC
Storage temperature -20 up to + 65oC
Relative humidity 95% max. non-condensing
Environment Inside
IP rating IP65
Supply voltage 14 – 30 VDC
Supply current 3/9, 4/8/14, 4-20, 8-20 mA
Relay contact ratings 1 A to 30 VDC (resistive load)
Field of view 90 min. cone
Spectral Response (IR) 1 to 2.7 m

Información adicional





Tipo detección

Flame optics

Abrir chat
¿Qué necesitas?
¡Este Ip65 Dual Infrared Sensor Flame Detector - IP66 puede ser tuyo desde*€2051,74*+IVA!
Si tienes alguna duda, escríbenos por Whatsapp