Dual-tech flame detector with IP65 infrared sensors – FF751 /
IP66 – FF756
The FF751is a dual-tech UV/IR2 infrared flame detector, mounted on a Zinc alloy housing and the FF756 is mounted on a flammable housing. This detector has an excellent response that gives high immunity to foreign sources that may interfere with you. The new technology of its microprocessor allows you to work with different levels of flame intensity and allows you to operate normally in adverse conditions, such as through smoke, vapors, dust, etc.. It can adjust the sensitivity of the detector , in accordance with EN54-10.
How is the installation and maintenance of the flame detector with dual infrared sensor IP65 – FF751 / IP66 – FF756?
The detector can be wired with two wires as a conventional system, through 4-20mA current loop or through voltage-free contacts. It can work with or without alarm interlocking. You can remotely activate the auto-test utility. An adjustable stainless steel bracket can optionally be supplied. The detector tolerates vibrations, and the wind does not affect its performance at all. The infrared sensor has an excellent response that even allow you to work through crystals or windows. Special test equipment is available for fine and precise adjustment of this type of detector. This test equipment also allows for operational testing.
How much does the flame detector with DUAL infrared sensor IP65 – FF751 / IP66 – FF756 reduce false alarms?
Most infrared detectors respond to light with a wavelength of about 4.3om, corresponding to the flames of most hydrocarbons. Thanks to its extended response, between 1.0 and 2.7om, this detector can respond to most flames even flashing. It can even detect flames not visible to the human eye, such as hydrogen flames. The combination of UV and IR2 detector filters and the processing of the signal being performed, make this detector can be used without any risk of false alarms in difficult situations, such as flames due to flashes of sunlight.
|Operating voltage||14 to 30 VDC|
|Net weight||2 kilograms|
|Operating temperature||-10 up to + 55oC|
|Storage temperature||-20 up to + 65oC|
|Relative humidity||95% max. non-condensing|
|Supply voltage||14 – 30 VDC|
|Supply current||3/9, 4/8/14, 4-20, 8-20 mA|
|Relay contact ratings||1 A to 30 VDC (resistive load)|
|Field of view||90 min. cone|
|Spectral Response (IR)||1 to 2.7 m|
|Spectral Response (UV)||185 to 260 nm|