Signal / Fireproof Blanket Poster. Class A

Descripción

https://www.serior.com/senal-cartel-de-manta-ignifuga-clase-a

Class A fireproof blanket signal

The Class A fireproof blanket signal is available in 1 mm PVC material. It also has several sizes of fireproof blanket signals tochoose from for this same product.

The fireproof blanket sign is used to indicate the location of an emergency blanket and each blanket must havean individually identifiable fire blanket signage.

Fireproof blankets are mandatory and all emergency blankets must be accompanied by fireproof blanket signs.

How to install a fireproof blanket signal?

The signage will be made on the wall where the equipment is installed or in any other element where we can paste the signal. The installationwill be in the same vertical at a height visible to users.

To stickit we must apply silicone to the back of the sign, 1 silicone point for each corner and another in the middle. With 5 silicone points we will have enough to install the sign on the wall.

Emergency signs regulations.

The photoluminescent signaling has to comply with the UNE 23035 standard

The signs have to be permanently identified, with the following data:

• Manufacturer name
• Month, year and manufacturing batch.
• Luminance in mcd / m2 according to UNE 23035-1
• Attenuation time
• Colors during stimulation
• Signal category (Class A or B) according to photoluminescence.

​
– According to the UNE 23034 standard: The Signs to use for evacuations and the sizes to use according to distances.

– According to UNE 23033 / ISO 7010: We will be able to check in the technical building code the different measurements / sizes of the signs regarding the observation distance.