COMPARTELO CON TU AMIGOS
FHSD8100-09 Suction Smoke Detector
€2531,27 + IVA
Suction Smoke Detector FHSD8100-09. High sensitivity LaserSense 100 suction. Kilsen product.
Agotado
*Los productos no incluyen gastos de transporte y los precios son exclusivos online.
Descripción
FHSD8100-09 Suction Smoke Detector
The LaserSense 100 detector is designed to provide very high smoke detection sensitivity in a small box.
ClassiFire perceptual artificial intelligence ensures that the detector operates at all timeswith optimal sensitivity to the protected environment, without the need for complex configuration. This means that the product will be configured to offer high sensitivity in a computer room or decrease its sensitivity in a smoke-filled area.
The detector is designed to fit into a docking station. All sampling tubes and cables are connected to the docking station leaving the detector placement for the end of the work. This ensures that the detectors are less likely to be damaged during installation.
Upgradeable fault and fire-free outputs are available for remote monitoring of detector status.
Where the FHSD8100-09 suction smoke detector can be applied
• Data storage units
• Cells
• Plant rooms
• Air conditioning units
• Rack equipment
• Computer rooms
• Air duct protection
• Heritage protection
• Critical teams
• Anti-tobacco applications
• Engine rooms
Available options
• APIC addressable cards™ available for Ziton protocol
• “Command Module” repeater available for central system monitoring
• SenseNet compatible – up to 127 detectors per loop
• Remote displays
• Suitable for MatrixScan, a patented software that provides virtual addressable detection – for example, 10 physical detectors can provide up to 45 unique addressable sampling points.
Features of the FHSD8100-09 Suction Smoke Detector
- Low-cost suction detector for easy and discreet installation
- High sensitivity provided by a detection in a laser camera
- Single sampling tube up to 100m in length or two of 50m (with calm air)
- ClassiFire ® unique perceptual artificial intelligence system that dynamically adjusts detector operating parameters, adjusting to daily changes in protected environment and dust contamination of the filtering system
- Unwanted dust alarms are avoided by patented LDD 3D3 laser dirt discrimination and by the removal system
- RS485 communication for networks and remote communications
| Operating voltage | 21.6 to 26.4 VDC |
| Current consumption | 400 mA |
| Detection principle | Mass detection by laser light scattering and particle evaluation |
| Particle sensitivity range | 0.003 μ up to 10 μ |
| Physical dimensions | 300 x 220 x 85 mm (width x height x depth) |
| Net weight | 3.8 kilograms |
| Color | Cream |
| Cable inputs | 2 x M20 |
| material | Sheet steel cover |
| Operating temperature | -10 to +60oC (EN54-20) |
| Relative humidity | 0 to 90% non-condensing |
| Environment | Inside |
| IP rating | IP40 |
| Certification | EN54-20 |
| Measuring range (% Obs/m) | 0.0015% to 25% |
| Alarm levels | 4 (Aux, pre-alarm, alarm and alarm 2) |
| Sinks | 2 |
| Length | Maximum stroke of 100 m (50 m in moving air) |
| Diameter | 27 mm outer diameter |
| Holes | up to 20 holes |
| Tired | 1 (optional) |
| Standard | 2 – Alarm (n/o) and fault (n/c) |
| Classification | 500 mA to 30 V |
| Expansion | Optional input and relay card |
| Indicators | Led |
Información adicional
| Fabricante | KILSEN |
|---|---|
| Sistemas De Aspiración | Detection equipment |
TAMBIÉN TE PUEDE INTERESAR
También te recomendamos…
-
¡Oferta!
27mm 9-10927 Pipe End Plug
€1,20 + IVA Leer más -
¡Oferta!
Pipe Clamping Staple Mount T/P 9-10954-100
€77,34 + IVA Leer más -
¡Oferta!
Air Heater For Suction Equipment 9-30422
€1296,80 + IVA Leer más -
¡Oferta!
Straight Junction For 27mm Pipes
€0,88 + IVA Leer más -
¡Oferta!
27mm Red Pipe 3m 9-10900
€9,36 + IVA Leer más
