Descripción
https://www.serior.com/detector-termico-convencional-wizmart-dtv
WizMart Series
The conventional Detectors of the WizMart series have behind them a development since 2002, the beginnings of taiwanese manufacturer exporting their products, where they have been deeply involved in the development of all kinds of smoke, gas, co2, heat, and home security related products.
Its technology focuses on quality products at competitive prices and its engineering team works on constant research to improve its products.
Equipment complies with UNE EN-54
WizMart offers another conventional detector solution for end users thanks to Guardal / Inim electronics.
General characteristics of the DTV-W thermovelocymetric detector
Wizmart’s conventional DTV-W thermovelocimetric detetor that provides us with Guardal / Inim electronics will give us an alarm signal when the equipment detects a temperature increase of 6.7oC inless thana minute, or exceed 57oC. The architecture of this detector is quite advanced in terms of detection and alarm failures in case of false warnings.
Possibility of including a high base next to the detector, which allows us to install for seen tube, anyway, it is a low profile design.
The base includes a connection toinstall, if necessary, a remote indicator.
Certified according to EC Directive 89/106/EEC issued by certified body 0845 – Certificate 0845-CPD-232139
Complies with UNE EN-54 part 5, 7 and 11.
Voltage |
10 – 35 V |
Consumption at rest |
55 uA to 24V |
Consumption in alarm |
50 mA |
Sensitivity |
57ºC Toa. Fixed
Rise Toa. 6.7oC < 1 min |
Operating temperature |
0oC – 38oC |
Relative humidity |
0% to 95% |
Diameter |
100 mm |
Height (without base) |
35 mm |
Led indicators (360o) |
2 |