COMPARTELO CON TU AMIGOS

Compartir en facebook
Compartir en whatsapp
Compartir en twitter
Compartir en email
Compartir en pinterest

FD810R-N Linear Smoke Detector Controller

611,42 + IVA

Controller with linear smoke detector FD810R-N / Kilsen. With a maximum coverage 50 to 100 x 7.5 m. Possibility to connect 2 detectors

SKU DEL PRODUCTO: FD810R-N Categorías , Etiqueta

*Los productos no incluyen gastos de transporte y los precios son exclusivos online.

Descripción

 

FD810R-N linear smoke detector controller

The FD810R-N consists of an infrared transmitter and receiver in a compact housing, and a ground-level controller, which also serves as a user interface for configuration and maintenance. The detector’s infrared signal is reflected in a prism and analyzed for smoke. It is especially designed to be used when spot smoke detectors are not applicable due to height or inaccessibility. The FD810R-N also features a motorized head, which allows automatic realignment in cases where there is a gradual change of construction. The unit has relay outputs for alarm and failure and adapts as such to all types of fire panels

 

How do I install the FD810R-N smoke detector driver?

System commissioning is simplified with a number of innovative features that combine to make the FD810R-N the fastest and easiest-to-install detector of its kind. Once the detector head is connected, using the Easifit First Fix system, an integral LASER can be activated, which aligns along the optical path of the beam. This allows the reflective prism tobe seen quickly and with reliability. Once the LASER has been used to approximately align the beam, the AutoOptimize beam alignment system takes control and automatically directs the beam to the optimal position.

 

Can I customize the FD810R-N smoke detector controller system?

The system can be fully customized, depending on the requirements of each installation. Both alarm thresholds (sensitivity) and alarm/failure time can be set from the System Controller at ground level. In addition, the integrated accessory assembly allows the use of a variety of standard accessories that solve any specific installation problem.

 

Driver features with FD810R-N smoke detector

  • EN54/CPD Approval
  • Automatic pollution compensation
  • 2-wire interface from detector to system controller
  • Laser-assisted alignment
  • Self-alignment
  • Supports up to 2 detector heads
  • Separate fire and fault relays by detector

 

Operating voltage 14 to 36 VDC
Current consumption Low power mode: 5.5 – 8 mA
High power mode: 36 mA
Range 50 to 100 m
Side detection 7.5 meters
Optical wavelength 850 nm
Color Grey-black
Operating temperature -10 to +55oC
Environment Inside
IP rating IP54
Certification EN54-12
Detector Dimensions 135 x 135 x 135 mm
Weight 500g
Controller dimensions 200 x 235 x 81 mm
Weight 1000g

Información adicional

Fabricante

KILSEN

Sistema

Conventional

Abrir chat
1
¿Qué necesitas?
¡Este FD810R-N Linear Smoke Detector Controller puede ser tuyo desde*€611,42*+IVA!
Si tienes alguna duda, escríbenos por Whatsapp