Descripción
https://www.serior.com/base-detector-enea-iris-guardal-inim-eb0010
Base for IRIS and ENEA fire or fume detectors. EB0010
The bases for the detectorsare necessary for the installation of them, without them, it would be impossible to connect a detector controlled by a fire plant.
Both Guardal/Inim electronics IRIS and ENEA series smoke detectors and fire detectors are compatible with this type of detector base.
Note that each manufacturer has a detector model with a different fit tab design to the base, so this type of base only serves the detectors described above. If we tried to connect another manufacturer’s detector or another model to this base, it would be impossible to fit it and therefore it wouldn’t do us any good.
The base has an isolator that guarantees the operation of the system in case of short circuit in the connection wiring.
It also has a metal tab that allows us to continue the circuit in case we disconnect the detector, avoiding a failure in the detection line and therefore failure in the fire plant in the absence of a detector.
Socket / Fire detector bas – low profile smoke.
Power | 10 – 30 V |
Diameter | 110 mm |
Height | 24 mm |
Weight | 15g |