COMPARTELO CON TU AMIGOS
Additional Barrier Detector With Coverage 50 m FD805RH-N
€394,52 + IVA
Additional barrier detector with coverage 50 m FD805RH-N / Kilsen. With range from 8 to 50 mfor FD805R-N or FD.
Agotado
*Los productos no incluyen gastos de transporte y los precios son exclusivos online.
Descripción
Additional barrier detector with coverage 50 m FD805RH-N
The FD805RH-N consists of aninfrared transmitter and receiver in a compact housing with reflective prisim, for the expansion of the FD805R-N or FD810R-N. The FD805R-N or FD810R-N ground level controller is supplied with a detector and can support an additional FD805RH-N or FD810RH-N unit. The detector’s infrared signal is reflected by a prism and analyzed for smoke. It is specially designed for use where spot smoke detectors are not applicable due to height or inaccessibility. The FD805RH-N also features a motorized head, which allows automatic realignment in cases where there is a gradual change of the building.
How do I install the additional barrier detector with 50 m FD805RH-N coverage?
System operationis simplified by a number of innovative features that combine to make the FD805RH-N the fastest and easiest-to-install detectorof its kind. Once the detector head is connected, using the Easifit First Fix system, an integral LASER can be activated,which is aligned along the optical path of the beam. This allows you to see the reflective prism quickly and with confidence. Once the LASER has been used to approximately align the beam, the AutOptimise beam alignment system takes over and automatically directs the beam to the optimal position.
Can I customize the additional barrier detector system with 50 m FD805RH-N coverage?
The system can be fully customized, according to the requirements of each installation. Both alarm thresholds (sensitivity) and alarm/failure time can be configured from the system controller at ground level. In addition, the integrated accessory assembly allows the use of a variety of standard accessories to solve any specific installation problem.
Additional Barrier Detector Features With Coverage 50m FD805RH-N
- Approved EN54 / CPD
- Building Shift Compensation
- 2-wire interface from detector to system controller
- Laser-assisted alignment
- Automatic pollution compensation
- Automatic alignment
| Operating voltage | 14 to 36 VDC |
| Range | 8 to 50 m |
| Side detection | 7.5 meters |
| Optical wavelength | 850 nm |
| Physical dimensions | 135 x 135 x 135 mm (W x W x D) – Detector 100 x 100 x 9.5 mm (W x W x D) – Reflector |
| Net weight | 500g – Detector 70g – Reflector |
| Color | Grey-black |
| Operating temperature | -10 up to + 55oC |
| Environment | Inside |
| IP rating | IP54 |
| Certification | EN54-12 |
Información adicional
| Fabricante | KILSEN |
|---|---|
| Sistema | Conventional |
